ApenGroup AQUAKOND AKY, Installation And Maintenance Manual

Page: 30 / 44

CONDENSATION BOILER
AQUAKOND AKY
30
code HC0048.01GB ed.B-1406
AKY
6. INSTRUCTIONS TO SERVICE STAFF
First start-up must be performed by an APEN GROUP Authorized Service Centre.
During first start up, the combustion efficiency must be analyzed.
This appliance is certified for EC and Extra-EC countries for the gas categories listed below.
6.1. Country Table - Gas Category
On the packaging of each equipment the following is clearly marked: Destination Country, gas category, and appliance code
translated into the language of destination Country.
The code shows the factory setting for the unit:
Codes without extension:
• AKY070IT no extension means that the unit has been prepared and tested for
OPERATION MODES gas [G20]
Codes with extension:
the fourth letter identifies the gas for which the unit has been set:
• AKY070FR-xxx
0
0 indicates the unit has been set and tested for natural gas [G20]
• AKY070MT-xxx 1 1 indicates the unit has been set and tested for Liquid Propane [G31]
• AKY070NL-xxx 2 2 indicates the unit has been set and tested for natural gas [G25]
• AKY070HU-xxx 3 3 indicates the unit has been set and tested for natural gas [G25.1]
Another label on the unit, placed near fuel supply, clearly states which gas type and supply pressure the unit has been set and
tested for.
Country Category Gas Pressure Gas Pressure
AT II2H3B/P G20 20 mbar G30/G31 50 mbar
BE <70kW I2E(S)B, I3P G20/G25 20/25 mbar G31 37 mbar
CH II2H3B/P G20 20 mbar G30/G31 50 mbar
DE II2ELL3B/P G20/G25 20 mbar G30/G31 50 mbar
DK, FI, GR, SE, NO II2H3B/P G20 20 mbar G30/G31 30 mbar
ES, GB, IE, PT, SK II2H3P G20 20 mbar G31 37 mbar
IT, CZ II2H3B/P G20 20 mbar G30/G31 30 mbar
FR II2Esi3P G20/G25 20/25 mbar G31 37 mbar
LU II2E3P G20/G25 20 mbar G31 37/50 mbar
NL II2L3B/P G25 25 mbar G30/G31 50 mbar
HU II2HS3B/P G20/G25.1 25 mbar G30/G31 30 mbar
CY, MT I3B/P G30/G31 30 mbar
EE, LT, SI, AL, MK II2H3B/P G20 20 mbar G30/G31 30 mbar
LV I2H G20 20 mbar
IS I3P G31 37 mbar
BG, RO, HR, TR II2H3B/P G20 20 mbar G30/G31 30 mbar
PL II2E3B/P G20 20 mbar G30/G31 37 mbar