APCON, Inc.
66
A54-3144-XR • Rev B
Chapter 5. Configure the chassis
ACI-3144-XR Chassis User Manual
The IP address command executes and the console banner again displays. This
process may take several seconds.
♦
Step 3. Access the chassis using CLI
After the IP address and netmask have been set, CLI may be accessed using either a
Telnet or an SSH client. However, these services must first be enabled on the chassis.
1. At the console prompt enter the following CLI command.
♦
Step 4. Access the chassis using CLI
1. On a computer with network access to the chassis, open a Telnet or SSH client.
2. Telnet to X.X.X.X, replacing the X’s with the IP address you specified for the chassis.
3. At the log-in prompt, enter the default name and password:
• User name:
admin
• Password:
secret
Follow your organization’s policies about requirements to change passwords. It is
recommended that you change the
admin
password as soon as possible. For instructions,
see the
CLI Reference Manual for the XR Switches
.
console> enable service telnet
console> enable service ssh
