manualshive.com logo in svg

Apcon ACI-3144-XR, User Manual

Share
Download
Apcon ACI-3144-XR User Manual Download Page 3

A54-3144-XR • Rev B

3

APCON, Inc.

Chapter 1: Preface

What you need to know.......................................................................................................................... 7
About this manual................................................................................................................................... 7

Contents of this manual  ................................................................................................................. 7
Conventions for notification  ........................................................................................................... 8
Conventions for the user interface  ................................................................................................ 8

APCON software products ...................................................................................................................... 9
Applications and web browsers supported........................................................................................... 9
Contact APCON .....................................................................................................................................10

Chapter 2: Introducing the chassis

Overview ................................................................................................................................................11
Features ................................................................................................................................................13

Modular hardware  ........................................................................................................................13
Embedded software ......................................................................................................................14

About the ACI-3144-XR chassis...........................................................................................................15

Chapter 3: Specifications and compatibility

Physical specifications .........................................................................................................................17
Safety and compliance.........................................................................................................................18
Power and electrical specifications.....................................................................................................18

AC power specifications  ...............................................................................................................19

AC Power Cords ......................................................................................................................19

DC power specifications  ...............................................................................................................20

DC Power Cords  .....................................................................................................................21
Dedicated circuit required .....................................................................................................22
Earthing for DC power supplies .............................................................................................22

Specifications for interfaces ................................................................................................................23

LAN ports .......................................................................................................................................23
Serial port ......................................................................................................................................23

RJ-45 cable pin-outs  ..............................................................................................................24
DB-9 adapter pin-outs  ...........................................................................................................24

SD card and USB port ...................................................................................................................25
Specialty interfaces  ......................................................................................................................25
Status LEDs ...................................................................................................................................25

Front of the chassis  ...............................................................................................................25
Back of the chassis ................................................................................................................25

Compatibility .........................................................................................................................................26

Blades supported ..........................................................................................................................26

Contents

Summary of Contents for ACI-3144-XR



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands