AP CG-05, User Manual

Page: 2 / 31

2
June 2012
Gas Controller
AUTOMATIKPRODUKTER
1 Application Intended for Use 4
2 Description 4
2.1 Normal Mode 4
2.2 Alarm Mode 4
2.3 Fault Mode 4
3 Operating Instruction 5
3.1 Description Keypad User Interface 5
3.2 Setting / Change Parameters or Set points 5
3.3 Code Levels 6
4 Menu Overview 7
4.1 Fault Management 8
4.1.1 Acknowledge a Fault 8
4.1.2 Error Memory 8
4.1.3 System Errors 9
4.2 Status Alarm 10
4.3 Status Relay 10
4.3.1 Manual Operation of the Relays 10
4.4 Menu Measuring Values 11
4.5 Menu Relay Parameter 12
4.5.1 Relay Mode 12
4.5.2 Relay Function Static / Flash 12
4.5.3 Latching Mode 13
4.5.4 Horn Function 13
4.5.5 External Operation of Alarm Relay 14
4.5.6 Delay Mode of Alarm Relay 14
4.6 Menu MP Parameter 15
4.6.1 Activate – Deactivate MP 16
4.6.2 Lock or Unlock MP 16
4.6.3 Selection Gas Type 17
4.6.4 Measuring Range Definition 18
4.6.5 MP Signal Definition 18
4.6.6 Threshold/ Hysteresis 18
4.6.7 Delay for Alarm ON and/or OFF 18
4.6.8 Control Mode Current or Average Value 19
4.6.9 MP Fault Assigned to Alarm 19
4.6.10 Alarm Assigned to Alarm Relay 19
4.6.11 MP Signal Assigned to Analog Output 19
4.7 Menu Data Logger 20
4.7.1 Data Logger Switch On/Off 20
4.7.2 Current values 21
4.7.3 CV Log Rate 22
4.7.4 Alarm Status 22
4.7.5 Error Status 23
4.8 Menu System Parameter 24
4.8.1 Service Mode 26
4.8.2 Software Version 26
4.8.3 MP Address Mode 26
4.8.4 Language 26