AP CG-05, User Manual

Page: 20 / 31

20
June 2012
Gas Controller
AUTOMATIKPRODUKTER
4.7 Menu Data Logger
This function is available from software version 9.02.
But only if the CG-05 controller is equipped with a mini USB interface incl. USB special cable at the bottom side
of the module. This option can’t be retrofit.
Connect an USB device at the USB cable to use the data logger function.
This USB device may be for example an USB stick version 2.0 (not all types have been tested).
In this menu, the parameters for the long-term recording of the USB device are set.
(Main menu)
See 4.7.1
See 4.7.2
See 4.7.3
See 4.7.4
See 4.7.5
4.7.1 Data Logger Switch On/Off
Starting the logger function.
Symbol Description
Setting
Status
Function
OFF Turned off OFF
OFF = Data Logger function is turned off
ON = Data Logger function is turned on
Note:
This function only works with an USB device.
If this function is active, the USB device mustn’t be removed, otherwise data may be lost!! (Like with Windows
– safe removal of USB devices)
Current value
Off
IW Log Rate
10s
Data Logger
Data Logger
Off
Alarm status
Off
Error status
Off