5
June 2012
Gas Controller
AUTOMATIKPRODUKTER
3 Operating Instruction
The complete configuration, parameterization and service are made via keypad user interface in combination
with the display screen. Security is provided via four password levels.
3.1
Description Keypad User Interface
Exits programming, returns to the previous menu level.
Enters sub menus, and saves parameter settings.
Scrolls down & up within a menu, changes a value.
Moves the cursor position.
LED orange:
Flashes when alarm one or more alarms are active.
Permanently on, when at least one relay is manually operated.
LED red:
Flashes when alarm two or more alarms are active.
Permanently on, when at least one relay is manually operated.
LED yellow:
Flashes at system or sensor failure or when maintenance needed.
LED green:
Power LED
3.2
Setting / Change Parameters or Set points
Open desired menu window.
Code input field opens automatically, if no code is approved.
After input of valid code the cursor jumps onto the first position segment to be changed.
Push the cursor onto the position segment, which has to be changed.
Set the desired parameter / set point.
Save the changed value.
Input finished.
