7
June 2012
Gas Controller
AUTOMATIKPRODUKTER
4 Menu Overview
The Gas Controller CGD-05 is operated via a simple and logical menu structure which is easy to learn. The
operating menu contains the following levels:
•
Starting menu with date and time if no MP is registered, otherwise scrolling display of the gas
concentrations of all registered transmitters in 5-second intervals. If alarms are active, only the values
of the transmitters currently in alarm status are displayed.
•
Main menu
•
Submenu 1 and 2
Starting menu
Main menu
Sub menu
After 30 sec.
or
Reading and reset of errors
See from point 4.1
Display of the status of actual alarms
See point 4.2
Display of the relay status
Manual operation of the relays
Reset function of the relays
See from point 4.3
Display of the measuring values
See point 4.4
Reading and change of the relay parameters
See from point 4.5
Reading and change of measuring point parameters
Activate or Deactivate MP
Assignment of the alarms to the alarm relay
See from point 4.6
Reading and change of the data logger parameters
See from point 4.8 (available from version 9.02)
Reading and change of the system parameters
See from point 4.7
Display of
Gas concentration
System Errors
Status Alarm
Status Relay
Measuring Values
Relay Parameter
MP Parameter
System Parameter
Power On time
AP
02.04.12 12:53
Data Logger
