15
June 2012
Gas Controller
AUTOMATIKPRODUKTER
4.6
Menu MP Parameter
For reading and changing measuring point parameters for each bus and analog transmitter including
registration of MP and assignment of the alarm relays.
The presentation of the MP parameters depends on the system parameter settings for the CG mode (see
4.8.3).
(Main menu)
MP01.
1
=
Parameter
bus transmitter
(Selection MP No.)
MP01.
2
=
Parameter analog
transmitter
Activate or deactivate MP
See 4.6.1
Lock or unlock MP
See 4.6.2
Definition of gas type, unit and number
of alarms at falling concentrations (AF)
See 4.6.3
Definition measuring range
See 4.6.4
Adjust signal form of the transmitter
See 4.6.5
Define threshold 1
See 4.6.6
Define threshold 2
See 4.6.6
Define threshold 3
See 4.6.6
Define threshold 4
See 4.6.6
MP Mode
active
MP Parameter
Measuring range
300 ppm
MP Signal
Linear
Threshold 1
80 ppm
Threshold 2
100 ppm
Threshold 3
120 ppm
Threshold 4
120 ppm
MP01.1
active
MP01.2
active
Gas unit AF
CO ppm 0
Lock
No
