Anton Paar DMA 4100 M Instruction Manual Download Page 16

Page: 16 / 152

5 Checking the Supplied Parts

C76IB003EN-E

Compact and robust design

The tradition of the legendary previous DMA generations is continued in the

M series:

•

Compact design

•

Sealed housing

•

Robust housing materials: coated aluminum (top and sides), aluminum

(base and back) and Polystyrene/Butadiene (front).

5 Checking the Supplied Parts

DMA 4100/4500/5000 M was tested and packed carefully before shipment.

However, damage may occur during transport.

1. Keep the packaging material (box, foam piece, transport protection) for

possible returns and further questions from the transport and insurance

company.

2. Check the delivery for completion by comparing the supplied parts to those

noted in Table 5.1.

3. If a part is missing, contact your Anton Paar representative.

4. If a part is damaged, contact the transport company and your Anton Paar

representative.

Table 5.1: Standard parts

Symbol Pcs.

Article

Description

Mat.

No.

DMA 4100 M

DMA 4500 M

DMA 5000 M

45498

45499

45500

Power cord

Europe

USA

Thailand

65146

52656

61865

79730

Instruction manual

English

German

80812

87090

Summary of Contents for DMA 4100 M

























































































































































Search results

Summary of Contents for DMA 4100 M

Reviews:

Related manuals for DMA 4100 M

Brands by name

Popular brands

Anton Paar DMA 4100 M, Instruction Manual

Search results

Summary of Contents for DMA 4100 M

Reviews:

Related manuals for DMA 4100 M

Brands by name

Popular brands