Anton Paar DMA 4100 M Instruction Manual Download Page 104

Page: 104 / 152

17 Service Utilities

104

C76IB003EN-E

4. Select the content of your backup file in the column "Value" and tap <OK>.

5. Tap <Yes> to create your backup file.

The backup file is stored into the root directory of your USB flash drive.

17.2 Restoring Instrument Settings

For version 1.70 and higher, you can restore any backup file made with version

1.60 or higher.

1. Tap <Menu> and select

"Service > Restore Instrument Settings"

to open

the "Restore" dialog.

2. Tap <Details> to scan the content of the selected backup file.

3. Select the location of your backup (USB flash drive) and the "file name"

using the two drop-down boxes.

The backup file must be stored in the root directory of your USB flash drive.

4. Tap <Next>.

5. Select the settings to be restored to your instrument in the column "Value"

and tap <OK>.

6. Tap <Yes> to restore the settings.

7. Follow the instructions on the screen.

17.3 Updating the Firmware

Generally, it is only necessary to update the user interface firmware. This sets up

the instrument with the new features of the latest firmware version containing the

module firmware.

NOTICE

For instruments with firmware version 1.60 installed it is not possible to

restore backups made with older firmware versions.

NOTICE

When restoring the instrument settings, make sure that the backup file

corresponds with the instrument type.

Summary of Contents for DMA 4100 M

























































































































































Search results

Summary of Contents for DMA 4100 M

Reviews:

Related manuals for DMA 4100 M

Brands by name

Popular brands

Anton Paar DMA 4100 M, Instruction Manual

Search results

Summary of Contents for DMA 4100 M

Reviews:

Related manuals for DMA 4100 M

Brands by name

Popular brands