10 Defining General Settings
C76IB003EN-E
43
2. If your network server has DHCP functionality, activate "Obtain an IP
address automatically (DHCP)", then tap <Next> and <OK>.
3. If your network server has no DHCP functionality, deactivate "Obtain an IP
address automatically (DHCP)" and enter the correct "IP Address", "Subnet
Mask", "Default Gateway", and tap <Next>.
4. Enter the primary and secondary DNS and tap <OK>.
10.1.7
Instrument Name and Location
If you have more than one DMA M and want to easily differentiate between them
in printouts, data exports or within your local network (LIMS), you can define
instrument names and locations.
1. Tap <Menu> and select
"Setup > Control Panel > Instrument Name and
Location"
.
2. Enter the "Instrument Name" and "Instrument Location" and tap <OK>.
10.2 Defining the Printout Settings
You can define the layout of the printer report and if you want an automatic
printout. To set the output data for each method, see Chapter 12.2.3.
10.2.1
Creating, Editing and Deleting Printer Report Layouts
You can set up to 10 different report layouts for e.g. different methods, different
sample types or for internal or external use. The layouts can be created, edited or
deleted.
To create or edit a report
1. Tap <Menu> and select
"Setup > Printout Settings > Report
Management"
to open the report list.
2. Tap <New> to create a new report or highlight a list item and tap <Edit>.
The two-step "Edit Report" wizard opens.
3. Perform the following settings:
•
Activate/deactivate the check box "Use as default report".
•
Enter a report "Name".
•
Select the report "Type" "List" or "Detail".
List reports contain several measurement results in a table.
Detail reports contain one detailed measurement result per page.
•
Activate/deactivate the "GxP compliant" function.
