Appendix G: List of Quick Settings Parameters
134
C76IB003EN-E
Appendix G: List of Quick Settings
Parameters
Parameter Type
Parameter Select
Description
Sample Name
Only in the "No Sample
List" mode
Type
S (Standard)
To perform a standard
measurement
C (Check)
To perform one of the
predefined checks. It is
only possible to select a
check which has been
defined for the selected
method before.
MM (Multiple
Measurement)
To perform 2 to 10
measurements of a
single sample
automatically.
TS (Temperature Scan)
To perform a
temperature scan.
Density Temperature
To set the temperature
of the density
measuring cell. Enter a
value between -25 and
95 °C (or 90 °C).
Density Measurement
finished by
Predetermination
default
Equilibrium
for DMA 5000 M:
Equilibrium fast
Equilibrium medium
Equilibrium slow
None (use method
default)
Density Timeout
To set the timeout for
the density
measurement (between
30 and 3600 s; default
600 s).
Density FillingCheck
TM
Always active
default
Not active
Active during
measurement
None (use method
default)
