Anritsu MD1230B-26, Operation Manual, Page: 92 / 102

Appendix A Specifications
A-2
Table A.1-1 Specifications (Cont’d)
Item Specification
4 Measurement functions
Session monitor
PPPoE status:
Stopped, PPPoE Discovery Stage, LCP,
Authentication, IPCP, Established, Terminate, PPPoE
Terminate, Error
Traffic counter Number of session: In progress, Established, Error
Tx frames and bps
Rx frames and bps
Frame loss
Delay variation measurement Resolution: 100 ns to 100 ms
Variation: resolution
× 30
Range: 0 to 3 s
Display format Table or graph
PPPoE packet counter PPPoE:
PADI/PADO/PADR/PADS/PADT
LCP:
Configure Request/Configure Ack/
Configure Nak/Configure Reject/
Terminate Request/Terminate Ack/
Echo Request/Echo Reply/
Code Reject/Protocol Reject/
Discard Request/Other
IPCP:
Configure Request/Configure Ack/
Configure Nak/Configure Reject/
Terminate Request/Terminate Ack/
Code Reject
CHAP:
Challenge/Response/Success/Failure
PAP:
Authenticate Request/
Authenticate Ack/Authenticate Nak/
Other
Only can display result stop after measurement.