Anritsu MD1230B-26, Operation Manual, Page: 37 / 102

2.3 Port Pair Parameters
2-7
2
Sett
ings
2.3 Port Pair Parameters
Set port pair parameters for port pair A and B.
The parameters item for each port pair are the same.
Here, the screen of port pair A is used as an explanatory example for the
parameter setting.
For details on Port Pair Combination setting, refer to Section 2.2.2
"Port Pair Combination"
2.3.1 General
For Port pairs A and B, set the delay distribution measurement range,
protocol packet transmission interval, and user flow transmission time.
(1) Delay
Set the measurement range (measurement start location and
resolution) when measuring delay distribution.
The measurement range is from start point to start point +
resolution
× 30 and is displayed in the variation column. Available
delay measurement range is from 0 to 3 seconds.
Fig. 2.3.1-1 Delay tab of the General window