Anritsu MD1230B-26, Operation Manual, Page: 28 / 102

Section 1 Overview
1-14
(2) Measurement
Traffic is measured based on parameters set in step (1).
Traffic measurement can be performed automatically or manually.
Manual measurement can be performed by manually establishing a
session, generating traffic, and disconnecting the session.
Auto measurement can also be performed by automatically
establishing a session, generate traffic, and disconnect the session
with a single operation. In addition, the number of repetitions can be
specified.
For details, refer to Section 3 "Measurement."
(3) Result view
Displays the measured results during and after measurement.
For details, refer to Section 4 "Monitor & Results".
(a) PPPoE Detail view
Displays the full session status of client being measured.
(b) Monitors Table view
Displays the traffic status during measurement as tables.
The PPPoE status counter, counter, and delay status are
displayed for each client.
(c) Monitors Chart view
Displays the traffic status during measurement as charts.
The PPPoE status counter, counter, and delay status are
displayed for each client.
(d) Results view
Displays the Results of the measured PPPoE packet as tables.