Anritsu MD1230B-26, Operation Manual, Page: 53 / 102

2.3 Port Pair Parameters
2-23
2
Sett
ings
■ Ports for when server uses Ethernet protocol
Set the IP address and MAC address of the server.
Fig. 2.3.3-8 Address tab of the Node window (Ethernet server)
Table 2.3.3-6 Parameter setting on the Address tab of the Node
window (Ethernet server)
Setting Item and
Parameter
Description
IP Address
Set the IP address of the Ethernet server.
Initial value: 0.0.0.0
MAC Address
Set the MAC address of the Ethernet server.
Initial value: 00-00-00-00-00-00
via Gateway
If the traffic goes through a gateway, select
this checkbox and set the gateway address.
Initial value: 0.0.0.0