Anritsu MD1230B-26, Operation Manual, Page: 39 / 102

2.3 Port Pair Parameters
2-9
2
Sett
ings
(2) PAD Interval
Set the PAD (PPPoE Active Discovery) Interval (time delay)
between the PAD packet transmissions during PPPoE session.
This setting is only valid when protocol type is set to PPPoE.
For details on Protocol Type setting, refer to Section 2.2.2 "Port
Pair Combination"
Fig. 2.3.1-2 PAD Interval tab of the General window
Table 2.3.1-2 Parameter setting on the PAD Interval tab of the General
window
Setting Item and
Parameter
Description
PADI Interval
• 1 to 999 ms
Select interval of the PADI (PPPoE Active
Discovery Initiation) packet transmission
during PPPoE session.
Initial value: 1 ms
PADT Interval
•
1 to 999 ms
Select interval of the PADT (PPPoE Active
Discovery Terminate) packet transmission
during PPPoE session.
Initial value: 1 ms