Anritsu MD1230B-26, Operation Manual, Page: 68 / 102

Section 3 Measurement
3-2
3.1 Measurement
There are two types of measurements:
• Auto measurement
• Manual measurement
3.1.1 Auto measurement
Auto measurement is started by clicking [Start] on the Control Bar and
measurement is performed automatically.
The Auto measurement sequence is as follows:
(1) Select Port Pair (Click [Use] checkbox).
↓
↓
(2) Establish PPPoE session of all clients for which connection is set
↓
(3) Start user flow transmission for the established session
↓
(4) End user flow transmission
↓
(5) Disconnect all established PPPoE sessions
↓
(6) End measurement
For details on connection setup, refer to Section 2.3.2 "Sessions"