Anritsu MD1230B-26, Operation Manual, Page: 72 / 102

Section 3 Measurement
3-6
During Manual measurement
Fig. 3.2-2 Control Bar (Manual measurement)
Table 3.2-2 Components of Control Bar (Manual measurement)
Components of Control
Bar
Description
1
Move up/down
button
Moves the Control Bar to the top/bottm
of the screen (below the Menu Bar).
2
Close button
Hides the Control Bar.
Select [View] - [Control Bar] checkbox to
redisplay at Main menu.
3
Use check
Selects the port pair to use.
Initial value: Checked
4
Status indication
Indicates port status.
(Ready / Starting / Running / Stopping)
5
Session count
indication
Indicates the number of established/set
PPPoE sessions. (When protocol type of
client is PPPoE)
6
Server/Client
indication
Indicates server or client.
7
Port button
Displays the Physical window of each
port. (Refer to Section 2.2.1 “Physical”)
8
Connection speed
indication
Indicates the connection speed and
communication method.
9
Connection status
indicator
Shows the port pair connection.
10
Start/Stop button
Starts measurement.
This changes to [Stop] button during
measurement.
11
Auto and
Manual radio
buttons
Used to switch between Auto/Manual
measurement by selecting the Auto or
Manual radio button.
Initial value: Auto
12
Start user flow
button
Starts user flow transmission during
manual measurement.
13
Stop user flow
button
Stops user flow transmission during
manual measurement.
14
User flow
selection checkbox
Selects client or server user flow
transmission during manual
measurement. No user flow is sent if not
selected.
Initial value: checked
10 121314
1 2 4 6 7 8 9 11
3
5