Anritsu MD1230B-26, Operation Manual, Page: 34 / 102

Section 2 Settings
2-4
Table 2.2.1-1 Parameter setting in the Physical window
Setting Item and
Parameter
Description
Port #
• 1 to 4
Select the port to set with a number.
Auto Negotiation
• On / Off
If On, Auto Negotiation is performed.
Initial value: On
If Auto Negotiation is On,
select one or more of the
following:
• 10 Mbps Half Duplex
• 10 Mbps Full Duplex
•
100 Mbps Half Duplex
• 100 Mbps Full Duplex
• 1000 Mbps Full Duplex
If Auto Negotiation is Off,
select one of the
following:
• 10 Mbps Half Duplex
•
10 Mbps Full Duplex
• 100 Mbps Half Duplex
• 100 Mbps Full Duplex
Select one or multiple communication
speed and method combination(s) to
measure.
Initial value: All selected
Note:
Parameters already set for ports 1 and 2 cannot be changed if an
MU120122A module is used, and the parameter setting is fixed as
follows:
Auto Negotiation: On
Line speed: 1000 Mbps
Duplex: Full Duplex.