Anritsu MD1230B-26, Operation Manual, Page: 62 / 102

Section 2 Settings
2-32
Table 2.3.3-11 Parameter setting on the User Flow tab of the Node
window
Setting Item and
Parameter
Description
Data Type
• IPv4
• TCP/IPv4
• UDP/IPv4
Set the data type of the user flow to be
sent.
IPv4: Add IPv4 header only.
TCP/IPv4:Add IPv4 and TCP header.
UDP/IPv4:Add IPv4 and UDP header.
Initial value: IPv4
Source Port
• 0 to 65535
Set the TCP/UDP source port number of
the user flow to be sent. This is valid when
TCP/IPv4 or UDP/IPv4 is selected.
Initial value: 0
Destination Port
• 0 to 65535
Set the TCP/UDP destination port number
of the user flow to be sent. This is valid
when TCP/IPv4 or UDP/IPv4 is selected.
Initial value: 0
Window Size
• 0 to 65535
Set the TCP Window value of the user flow
to be sent. This is valid when TCP/IPv4 is
selected.
Initial value: 0
Precedence
• 0 to 7
Set the precedence value of the user flow
to be sent. Set the IP header and TOS
(Type of Service) fields.
Initial value: 0
DSCP
• 000000 to 111111
Set the DSCP value. Set the IP header and
TOS (Type of Service) fields.
Initial value: 000000
For details on the packet format of the sent user flow (traffic), refer to
Appendix B "Stream Format"