Anritsu MD1230B-26, Operation Manual, Page: 74 / 102

Section 3 Measurement
3-8
3.3.2 Starting Manual Measurement
Manual measurement is performed as follows:
Fig. 3.3.2-1 Manual measurement start procedure
1. Check that status is “Ready” and server and client are connected.
For details on server and client Connection refer to Section
2.3.2 (1) "Connection"
2. Click the “Manual” radio button.
3. Select the [Use] checkbox of the port pair to measure.
4. Click the [Start] button. (This changes to [Stop] button during
measurement.)
5. Select the client and server to send the user flow.
6. Click the user flow start button to send.
(User flow transmission starts.)
7. Repeat steps 5 to 6 as necessary to send the user flow.
8. Click the [Stop] button to end measurement.
PPPoE session is disconnected and the screen returns to the state
before starting measurement.
Notes:
1. During measurement, the [Start] button changes to [Stop]
button.
2. Click the user flow stop button to stop user flow transmission.
4
3
5 6
1 2