Anritsu MD1230B-26, Operation Manual, Page: 20 / 102

Section 1 Overview
1-6
1.4 Starting Application
To use this option, the main unit operation mode must be set to PPPoE
mode. Once set, the operation mode setting is not required again since the
setting is retained in the main unit. The PPPoE mode is set as follows:
Setting PPPoE mode
1. Connect a mouse to the main unit before turning it on. Install the
module to be used by this option in the main unit.
2. Turn on the main unit, and wait until the Selector is started. Press
the [Setup utility] button to start the Setup utility.
Fig. 1.4-1 Selector (Normal mode)