Anritsu MD1230B-26, Operation Manual, Page: 45 / 102

2.3 Port Pair Parameters
2-15
2
Sett
ings
Table 2.3.2-1 Parameter setting in the # of Sessions and Rate of the
User Flow dialog
Setting Item and
Parameter
Description
Link direction
• DownLink/
UpLink
Set the link direction.
At UpLink, Client becomes the Stream Tx
side, and at DownLink, Server become the Tx
side. As a consequence, part [1] becomes
Client1 to Client16 at UpLink, and Server1 to
Server16 at DownLink.
Initial value: UpLink
Total Rate
• 1 to 100%
Set the transmission rate (%) for each port.
Initial value: 10%
No.
Set whether or not to send traffic.
Select the checkbox [2] of server (if
DownLink) or client (if UpLink) that sends
the traffic.
Initial value: All checked
# of Session
• 0 to 1000 sessions
(Total session of all
client is 1000)
This is only allowed for UpLink.
Initial value: 1
Frame Size (bytes)
• 64 to 1518 bytes
Set the frame length of the user flow sent
from the server (if DownLink) or client (if
UpLink).
Initial value: 1518 bytes
Note:
The frame length set for Frame Size, described above, is the frame
length of the Ethernet frame. The frame length of the actually sent
user flow is the sum of the frame length set for Frame Size and that
of the VLAN tag.
For details on VLAN setting, refer to Section 2.3.3 (3) "VLAN"