Angelus Sanitary Can Machine Company
SERVICE NOTICE
2 of 2
Rev. 3-13-00
Place the square at this point of the
transfer from the Insert to the Can
Feed & Discharge Rail Assembly.
Adjust the Discharge Rail Upper using the adjustment screw and spring assembly until the can
transfer at the point where both upper and lower vertical surfaces at the square become even.
Spring & Adjustment Screw
Upper & lower vertical surfaces
When the adjustment is completed,
the Discharge Rail Upper surface
should be approximately 1/16 of an
inch behind the surface of the Can
Feed & Discharge Rail.
Model 180S Can Feed & Discharge Rail Assembly Procedure continued;
Modified to include the
"Discharge Rail Upper Insert"
8/29/95-18045001
