ANGELUS SANITARY CAN MACHINE COMPANY
SERVICE NOTICE
VARIABLE SPEED INCHING MECHANISM "VARIATOR PART NO. 5S822"
RECOMMENDATIONS:
1.
DO NOT START THIS MECHANISM AT FULL 90 CANS/MINUTE SPEED.
2.
DO NOT REVERSE DIRECTION OF MOTOR BEFORE FIRST BRINGING SEAMER TO
A COMPLETE STOP.
3.
BE CERTAIN THAT THE TOOTH CLUTCH IS PERIODICALLY CHECKED FOR THE
PROPER .015" GAP AND OPERATION OF CLUTCH IS NORMAL.
4.
ALWAYS MAINTAIN PROPER OIL LEVELS AND USE RECOMMENDED LUBRICANTS.
CAUTION:
THIS UNIT IS A HYDRAULIC PUMP AND WILL NOT FUNCTION PROPERLY WITH AN
INADAQUATE OIL LEVEL. THIS COMPLETE UNIT IS DESIGNED FOR
MAINTENANCE ON THE SEAMER AND NOT TO BE USED FOR PRODUCTION OR
FOR CLEARING CAN JAMS.
IMPORTANT NOTICE:
LIMITER DEVICES
ROTATION OF THE VARIATOR CAN BE LOCKED OUT IN EITHER DIRECTION. REVERSE
DIRECTION IS LOCKED OUT AT THE FACTORY AND ONLY MOTOR DIRECTION
ALLOWS REVERSE ACTION.
TO USE ROTATION LIMITERS,
1.
ADJUST THE VARIATOR TO THE REQUIRED MAXIMUM SPEED OR TO ZERO
R.P.M. IF A DIRECTION OF ROTATION IS TO BE ELIMINATED.
2.
LOOSEN THE LOCKNUT ON THE APPROPRIATE ROTATION LIMITER, TURN THE
ROTATION LIMITER UNTIL IT BOTTOMS OUT AGAINST THE ADJUSTING
MECHANISM AND RETIGHTEN THE LOCKNUT.
VIEW OF VARIATOR IS FROM THE
OUTPUT SHAFT END.
ITEMS 1 & 4 = LOCKNUTS
ITEMS 2 & 3 = ROTATION LIMITERS
CLOCKWISE ROTATION LIMITER
COUNTERCLOCKWISE
ROTATION LIMITER
1
2
3
4
5/20/91-18022001
