55
15. ID Number and GMP, GLP
The ID number is used to identify the scale when Good Manufacturing Practice (GMP) or Good
Laboratory Practice (GLP) is used. Using the optional HVW-02BCWP USB interface or optional
HVW-03CWP RS-232C serial interface, the data corresponding to the following GMP or GLP can be
output to a printer or PC.
Results of calibration (“Calibration Report”)
Results of calibration test (“Calibration Test Report”)
“Start Block” and “End Block” for GMP, GLP data
15.1. Setting the ID Number
Step 1 With the display turned off, while pressing and holding the
TARE key, press the ON/OFF key to turn the display on and
enter the function setting mode.
ba5fnc
appears.
Step 2 Press the MODE key several times to display
id
.
Step 3 Press the ENTER key.
Enter the ID number using the following keys.
M+
: To move the blinking digit to the left
: To move the blinking digit to the right
Numerical keypad
: To set a value for the blinking digit
See the table below for the ”Display
Character Table.”
Step 4 Press the ENTER key to store the setting.
id
appears after
end
.
Step 5 Press the ON/OFF key to turn the display OFF or press the
ZERO key.
Display Character Table
0 1 2 3 4 5 6 7 8 9 - A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
0 1 2 3 4 5 6 7 8 9 -
_
_
a b C d e f g H i j k l m n o p q r s t U v w x y z
“ ” :
Space, ASCII 20h
Press
several
times
Set using corresponding
keys.