AND HV-15KCWP, Instruction Manual, Page: 35 / 72

33
13.2. Parameter List
For the HV-CWP series NTEP/Measurement Canada version, the shaded items in the table below cannot
be changed by the user, so these items are not displayed.
Class
Item Parameter Details and usage
ba5fnc
Key lock
lock
0
■
All keys function
1 The ON/OFF, ZERO, TARE, HOLD, M+ and PRINT keys function.
2
The ON/OFF, ZERO, TARE keys function.
Automatic
power off
poff
0
■
OFF
1 After 5 minutes
2 After 10 minutes
3
After 15 minutes
4 After 30 minutes
5 After 60 minutes
Automatic power on
p-on
0
■
OFF
1
ON *The scale automatically turns the power on by
connecting to the power.
Zero tracking
trc
0 OFF
1
■
ON
Stability band
width
5t-b
0
■
±
0.5 d
1
±
1 d
2
±
2 d
Stability band
time
5t-t
0 0.5 seconds
1
■
1.0 second
2 1.5 seconds
Response
Cond
0
Fast response/poor vibration tolerance (good environment, target weighing)
1
2
■
3
4
Slow response/stabilized display (priority on stability)
Backlight control
l-it
0 Always turned off
1 Always lit
2
■
Turns off 5 seconds after stabilizing
3
Turns off 10 seconds after stabilizing
4 Turns off 15 seconds after stabilizing
5 Turns off 30 seconds after stabilizing
Backlight
brightness
l-i
0 Dark
1
2
3
■
4 Bright
Decimal point
pnt
0
■
Dot (.)
1 Comma (,)
Automatic tare
at
0
■
OFF
1 ON
■
factory settings d: readability(scale interval or "division")
Automatic power off: When the specified interval has passed while the display is zero, the display is stable and there is no key
operation, the display turns off.
Stability band width: When the weighing value is within a certain width (stability band width) and a certain interval (stability band
time) has passed, the scale judges that weighing is stable and lights up the stability indicator. To precisely
judge the weighing until it is stabilized, set the numerical value to be small. To loosely judge, set the numerical
value to be large.
Stability band time: When the weighing value is within a certain width (stability band width) and a certain interval (stability band
time) has passed, the scale judges that weighing is stable and lights up the stability indicator. To precisely
judge the weighing until it is stabilized, set the numerical value to be large. To loosely judge, set the
numerical value to be small.