18
8. Counting Mode
The counting mode is the function to convert the total mass value (total weight) of articles to a count,
when each article has the same mass value.
To use this function, store a unit mass in advance.
Even if the power is turned off, the unit mass is maintained in non-volatile memory.
8.1. Storing a Unit Mass
Step 1 Press the MODE key to display the unit pcs.
Step 2 Press the ENTER key while pressing and holding the
SET key to enter the mode for storing a unit mass.
Step 3 Press the SET key to select the number of samples:
5 pieces, 10 pieces, 20 pieces, 50 pieces or 100 pieces.
The greater the quantity of samples, the greater the
accuracy of the count.
Step 4 Place the container on the weighing pan.
Press the TARE key.
Step 5 Place the number of samples selected at Step 3.
After the stability indicator is displayed, press the
ENTER key to store it.
CAUTION
When the sample total mass value is too small and it is not
possible to calculate a unit mass, the scale displays
lo ut
and returns to step 3. Increase the number of samples. The total
sample mass are required more than 10 times of readability in
kg.
When the unit mass is too small to store, the scale displays
1
lo ut
. . In this case, the unit mass will not be stored even
if the number of samples is increased.
To return to the weighing mode, press the MODE key.
Step 6 The count is displayed.
Step 7 Remove the samples and the container from the weighing pan.