9
Step 7 To remove the bracket from the base unit, use a hex wrench.
For HV-15KCWP, HV-60KCWP,
HW-10KCWP, HW-60KCWP
For HV-200KCWP,
HW-100KCWP, HW-200KCWP
5mm Hex Wrench
6mm Hex Wrench
Step 8 Connect the load cell cable to the terminal of the display unit.
Step 9 Close the load cell panel.
Step 10 Check the weighing accuracy.
* The installation example is when the optional indicator
holder (AX-043005266) is used after the pole is
removed.
5.3. Grounding the Scale
When using where there may be static electricity, ground the scale.
The grounding method differs depending on the model.
Ground the scale properly according to the model.
Method-A procedure to ground the scale
（
HV-15KCWP, HW-10KCWP
）
Secure the grounding wire using an M4 screw in the screw
hole between the two hexagon bolts on the base unit
bottom side (Part “ ”).
Method-B procedure to ground the scale
（
HV-60KCWP, HV-200KCWP,
HW-60KCWP, HW-100KCWP, HW-200KCWP
）
Secure the grounding wire together with the screw that
secures the bottom cover (Part “ ”).
Hex Bolts
Hex Wrench
Bracket
Bottom of
Base Unit
Bottom Cover
Indicator Holder
(To be purchased separately as an option)
Bottom of
Base Unit
Leveling Foot