79
www.analogway.com
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
Install the Analog Way Vioso tools from the AW website to the Windows 10 or 11 PC which has the camera
connected.
NOTE: Vioso calibration tools and the Picturall server
communicate over the network via NDI signals
(to send test images and patterns).
Check your network settings to verify that NDI signals can connect. See more how to add NDI into your network from Newtek
8.8.1.1
Picturall Display Configuration software
After installing the Analog Way Vioso tools begin with starting up the Picturall display configurator. With this
program a new project is created for the calibration.
NOTE: Vioso autocalibration tools require Windows 10 or 11 (64-bit) to work properly.
•
Set the Project name and Project path in the installation folder.
•
Available network adapter is auto filled.
•
Set the address of the target server and click Configure.
o
It will get the information on available displays/projectors from the server.
After setting up the project name and defining the ip of the server the program scans the server resources
(outputs) that are available for the projection mapping. After this process, the program then pushes the
information to Projector and display setup.
Fig. 66 -
Vioso Picturall display configurator