35
www.analogway.com
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
5.1.7.2
Manual audio channel routing
Use
Manual channel routing mode
to manually configure the server audio output channels for different
audio devices and sources.
1.
Select
Manual channel routing
mode then
Save
.
2.
In Audio interfaces, click
+ Add new
to add new audio interface.
a.
Enter a name.
b.
In Audio device, select a detected audio device in the list or select None to mute any mixer
channel it is connected to.
c.
In Output and Input channels, set the number of channels for the interface. Any channel
missing in the connected audio device will be set to mute.
3.
Click
Save
.
Fig. 21 -
Add new audio interface
4.
Route the configured audio interface to any channel of the channel mixer from each audio output
channel’s drop
-down menu.
5.
Click
Apply
below the Channel mixer.
In the following example, an NDI
™
Streaming display is configured with two audio channels which are routed
to audio mixer channels 17 and 18.
Tip
: After applying the audio configuration, the audio interfaces also appear in the Picturall Commander Audio Channel
Mixer (see
9.6 Audio channel mixer (optional)
page 99).
Fig. 22 -
Manual audio channel routing example
