34
www.analogway.com
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
5.1.7.1
Automatic channel routing
Fig. 20 -
Audio settings in web configurator
By default, audio is configured with
Automatic channel routing
. The audio device channels will be
automatically connected to mixer channels when they are available (according to audio device priority list
available below). Automatically routed audio channels will appear below the audio mode selection (if
available).
Priority Audio device
1
Internal XLR audio option (2ch out or 2ch in/out)
2
Dante license
3
Dante USB
4
RME USB audio cards
5
Other supported USB audio cards
6
Configured NDI
™
streaming displays with audio enabled
7
Other detected audio devices
Table 4 -
Automatic audio mode: audio device priorities
The two audio interfaces with highest priority will be routed until the audio mixer runs out of channels.
Highest priority audio interface channel 1 will be routed to server audio mixer channel 1, audio interface
channel 2 to mixer channel 2 and so on until all the channels have been connected. If there are channels
available in server audio mixer, second highest priority audio interface channels will be routed to the
remaining audio mixer channels.
Note
: In Automatic channel routing mode, if there are more than two audio interfaces connected to the server, the routing will only route
two audio cards to the server audio mixer.
Tip
: Use manual channel routing when more than one audio device is connected to the media server.
