28
www.analogway.com
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
5.1.2
Server configuration
Fig. 13 -
Server configuration
Set server settings from the
Server configuration
:
-
Number of layers:
Set the number of layers to use and patch to Art-Net (max 200). This affects the
number of available layers in Picturall Commander.
-
Max layer width and height:
Set the maximum resolution to be processed by the media server.
Caution
: Media with a larger resolution than the max layer size might not be displayed correctly. This does not apply
to media files encoded in AWX and PRKL.
-
Triplebuffering:
check to enable Triplebuffering.
-
Enable sync card and genlock
(Picturall Pro only)
:
check to enable Genlock (checked by default if the
sync card is installed).
-
Enable event logging:
the system gathers logs from playback events. The log file can be downloaded
from the
Tools
>
Event Log
page.
5.1.3
LTC configuration
Set the Linear timecode (LTC) sources for playback. Configured LTC sources can be used as timecode
providers in Picturall Commander (see
page 122).
Fig. 14 -
LTC configuration
Note
: Audio device with input channel is required for LTC. Different audio input channels can be defined for different incoming Timecodes.
The system does not automatically recognize the incoming LTC format FPS (Frames per second). The incoming timecode FPS needs to
be defined from the drop-down menu on the LTC configuration page for the timecode to synchronize correctly.
