Analog way MSP16-MkII, User Manual

Page: 129 / 169

129
www.analogway.com
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
10.10.2 Cue macro actions
Tip
: A little “
M
” appears next to the Cue number (or Cue stack number) to indicate that a Cue macro is enabled.
When creating a Cue macro, the following window opens and four macro actions are available:
- Trigger a specific cue
- Trigger a specific playback
- Send a network command
- Custom macro
Fig. 114 - Cue macro
10.10.2.1 Trigger cue macro
This executes a cue when a macro is executed.
1. Click Trigger cue .
2. Click the dropdown list and select a cue.
3. Click OK.
10.10.2.2 Trigger playback
This executes a playback when a macro is executed.
1. Click Trigger playback .
2. Click the dropdown list and select a playback number.
3. Click OK.
10.10.2.3 Trigger network command
This sends a custom command to a device connected on the same network when a macro is executed.
1. Click Trigger network command .
2. Enter the target address and port number.
3. Enter the command to be sent.
4. Choose the Line separator.
5. Click OK.