27
www.analogway.com
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
5
Configuration
The server can be configured from the
Web configurator
or by booting the server in
Configuration mode
.
Configuration
is needed for DMX / Art-Net, display, network and media storage settings.
5.1
Web configurator
Caution
: Mark II media servers require at least 1GB network to maintain a stable connection. Network will not work with
100Mb connection.
The web configurator allows the user to configure the server from a computer connected to same network
without installing a separate control software.
To access the web configurator, launch a web browser and enter the server IP address in the address bar.
Fig. 11 -
Web configurator connection
All devices default IP addresses are
192.168.2.140
.
Note
: The Picturall Series Media Server and the computer must be connected to the same network to run the Web configurator.
5.1.1
Dashboard
Fig. 12 -
Web configurator Dashboard
The Dashboard is the home page of the Web configurator. It shows general information about the media
server.
-
Click
Configure server
or
Configurator
to access server configuration.
-
Click on a link in the left tab to open the corresponding menu.
