121
www.analogway.com
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
10.6.4
Timecode generator
Timecode generators can be used to generate timecode and emit it to connected timecode targets. Set the
timecode generator by opening the menu below the cues or from the top icon row.
Fig. 107 -
Timecode generator menu locations
A timecode generator can also act as a proxy for another timecode provider. Synchronizing a timecode
generator to another timecode provider disables timecode generator controls. To enable controls again,
select “None” as the selected timecode provider.
Timecode generator supports basic controls and actions such as
Play
,
Pause
,
Stop
,
Seek
To and End Action.
Inpoint and outpoint can also be adjusted. Up to eight simultaneous timecode generators are supported.
Tip
: If a Timecode generator menu does not appear properly (content is hidden), enlarge the menu by stretching the menu
from the top.
Fig. 108 -
Timecode generator settings
10.6.5
Midi Timecode (MTC)
Incoming MTC signal can be used as a timecode provider. Output offset can be applied to MTC signal, but
please note that the same output offset is used for both MTC timecode provider and MTC timecode out. See
page 134 for details on how to set MTC out offset.
Note
: The optional audio card is required for MTC.
