60
www.analogway.com
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
6
Configure Picturall Commander
Fig. 50 -
Picturall Commander
Picturall Commander is the software used to control the Picturall Series Media Server. This chapter describes
the installation and the top-level parts of the Picturall Commander user interface.
6.1
Installing / Updating Picturall Commander
Caution
: Picturall Commander must always be in the same version as the Server software. Update Picturall Commander
together with Server software for best compatibility and performance. A message is displayed in Picturall Commander if
the versions do not match.
Tip
: Use a dedicated computer for running Picturall Commander. This ensures that the show files are safe at all times.
The software is on the USB drive delivered with the server. The latest version of Picturall Commander for
Windows, OSX and Linux can be downloaded from
To install Picturall Commander, follow these steps:
1.
On the computer, insert the USB drive delivered with the media server.
2.
Copy the installer file matching the operating system from the USB drive to the computer.
3.
Run the installer file and follow the instructions to complete the installation process.
4.
If needed, open Picturall Commander and go to
File / Load show
to load previous configuration.
Note
: For Commander versions prior to 2.8.0, the operating systems must support
Java version 8
for Picturall Commander to be installed.
Make sure
Java version 8
is installed on the computer before installing Picturall Commander or use the latest version of Picturall
Commander.
