61
www.analogway.com
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
6.2
Connecting to Picturall Series Media Server
Caution
: - If the computer goes into a standby mode, the connection to the server is lost after the computer resumes.
- Mark II media servers require 1GB network to maintain a stable connection. Network will not work with 100Mb connection.
Tip
: If the media server is restarted, close and restart Picturall Commander as well.
Fig. 51 -
Add new connection dialog
1.
Connect the computer and the Picturall Series Media Server to the same network.
2.
Use same netmask in the server and the computer if not using
DHCP server
. If
DHCP server
is enabled
in the server, use automatic network settings in the computer.
3.
Run Picturall Commander and click
Add new connection
on the
Connections
tab.
4.
Type the IP address of the server in the
Address
field or click
Locate
to automatically find the servers
in the same network and view the server versions before connecting.
5.
In the
Name
field, enter a name for the connection.
6.
Under
Advanced
, change the values for Text protocol port and Data protocol port if needed.
7.
If needed, uncheck
Connect immediately
.
8.
Click
Finish
to Create the Connection. A message confirms the connection to the Picturall Series
Media Server.
6.3
User Interface
The Picturall Commander user interface consists of a few basic elements:
-
The main Commander toolbar.
-
The control tabs.
-
The control panels within the tabs.
The control tabs are positioned in the right, middle, left or bottom depending on their function.
6.4
Control Tabs
Click
Window
then click any menu to open the corresponding control panel.
-
Connections:
Connect and reconnect to a server pressing Reconnect button. The main control tabs
are available in the
Connections
tab.
-
Media:
Transfer media files to the Picturall Series Media Server and arrange the media library. For
more information, see
page 63.
-
Displays:
Configure the display setup. For more information, see
page 72.
-
Displays Graph:
Open the Display Graph in a whole tab for precise adjustment, see
page 72.
-
Genlock
(only for Picturall Pro equipped with optional sync card)
:
Check / Resync the genlock.
