Upgrading Firmware
99
MVP-9000i 9" Modero® ViewPoint® Touch Panel with Intercom
A Special Note for Network Interface Connections
Due to any USB connection to your PC being made through a Network Interface Connection (NIC), Windows will
automatically make any new NIC connection the Primary connection. If this happens, the USB address of 12.0.0.x will
show up across the PC’s network switches as the PC’s source address. In some cases, network administrators will notice
the NIC connection and reconfigure any PC that has connected to the MVP-9000i. Business, college, and government
installations are the type of installations that would be most affected, and most home installations would not be affected.
To prevent the NIC connection from becoming the primary connection:
1.
From the Windows
Start
menu, select
Settings > Control Panel
to open the
Control Panel
window.
2.
In the
Control Panel
window, click on the
Network Connections
icon to open the Network Connections window
(FIG. 112)
3.
From the
Advanced
menu, select
Advanced Settings...
to open the
Advanced Settings
window (FIG. 113).
4.
Under the
Adapters And Bindings
tab, the user needs to make sure the Local Area Connection is not at the top of the
Connections
list. If it is at the top of the list (FIG. 113), select it and use the
down
arrow to the right of the list to
move it to the bottom of the list (FIG. 114).
FIG. 112
Network Connections window
FIG. 113
Advanced Settings window
Summary of Contents for MVP-9000i
