manualshive.com logo in svg

AMX MVP-9000i, Operation And Reference Manual, Page: 79 / 202

Share
Download
AMX MVP-9000i Operation And Reference Manual Download Page 79

Protected Setup Pages

65

 MVP-9000i 9" Modero® ViewPoint® Touch Panel with Intercom

System Settings - Wired

Use the options on the 

Wired 

Tab (FIG. 73) to configure communication settings for Ethernet communication with the 

MVP-9000i. 

Features on this page include:  

FIG. 73  

System Settings - Wired Tab

System Settings - Wired Tab

Back:

Saves all changes and returns to the previous page.

WiFi/Wired icon:

The icon to the left of the Connection Status Icon displays whether the current 
connection to the Master is 

Wireless

 (image of a radio antenna) or 

Wired

 (image 

of three networked computers).

Connection Status icon:

The icon in the upper-right corner of each Protected Setup page provides a 
constant visual indication of current connection status.

Note

: a Lock appears on the icon if the panel is connected to a secured NetLinx 

Master.

DHCP/STATIC:

Sets the panel to either DHCP or Static communication modes. 

•

DHCP 

- a temporary IP Addresses is assigned to the panel by a DHCP 

server. If DHCP is selected, the other IP Settings fields are disabled (see 
below).

•

Static IP

 is a permanent IP Address assigned to the panel. If Static IP is 

selected, the other 

IP Settings 

fields are enabled (see below).

IP Address:

This is the IP address for this panel.

Subnet Mask:

This is the subnet mask for this panel.

Gateway:

This is the gateway address for this panel.

Host Name:

This is the host name for this panel.

Primary DNS:

This is the address of the primary DNS server used by this panel for host name 
lookups.

Secondary DNS:

This is the secondary DNS address for this panel.

Domain:

This is a domain name to the panel for DNS look-up.

MAC Address

This unique address identifies the wireless Ethernet card in the panel (read-
only). 

If the touch panel will not be used in a docking station, or if the docking station will not 
have network connectivity (i.e., if the docking station is being used only to charge the 
device), using the default DHCP setting for the wired interface is highly 
recommended. Configuring a static IP address on the 

Wired Settings

 page without 

network connectivity may lead to a loss of connection.

Summary of Contents for MVP-9000i











































































































































































































Reviews:

No comments