manualshive.com logo in svg

AMX MVP-9000i, Operation And Reference Manual, Page: 112 / 202

Share
Download
AMX MVP-9000i Operation And Reference Manual Download Page 112

Upgrading Firmware

98

 MVP-9000i 9" Modero® ViewPoint® Touch Panel with Intercom

5.

If the panel firmware version is not the latest available; locate the latest firmware file from the 

www.amx.com

 > 

Tech Center 

> 

Firmware Files

 > 

Modero Panels

 section of the website.

6.

Click on the desired Kit file link and after accepting the Licensing Agreement, verify download of the Modero Kit 
file to a known location.

7.

Select 

Tools

 > 

Firmware Transfers > Send to NetLinx Device

 from the main menu to open the 

Send to NetLinx 

Device

 dialog (FIG. 110). Verify that the panel’s System and Device number

 

values match those values listed within 

the System folder in the 

OnLine Tree

 tab of the Workspace window.     

8.

Select the appropriate Kit file from within the Browse for Folder window (FIG. 111).

9.

Select the panel’s Kit file from the 

Files

 section.

10.

Enter the 

Device

 value associated with the panel and the 

System

 number associated with the Master (

listed

 

in the 

OnLine Tree tab of the Workspace window

). 

The Port field is greyed-out.

11.

Click the 

Reboot Device

 checkbox if it is not already checked. This causes the touch panel to reboot after the 

firmware update process is complete.

12.

Click 

Send

 to begin the transfer. The file transfer progress is indicated on the bottom-right of the dialog.

13.

After the file transfer is complete, the panel will automatically reboot. As the panel is rebooting, temporarily unplug 
the USB connector on the panel until the panel has completely restarted.

14.

Once the first panel page has been displayed, reconnect the USB connector to the panel.

15.

Right-click the associated System number and select 

Refresh System

. This causes a refresh of all project systems, 

establishes a new connection to the Master, and populates the System list with devices on your particular system.

16.

Confirm that the panel has been properly updated to the correct firmware version.

The panel-specific firmware is shown on the right of the listed panel. 
Download the latest firmware file from 

www.amx.com

 and then save the Kit file to 

your computer. Note that each Kit file is intended for download to its corresponding 
panel. In some cases, several Kit files may be included in a .zip file; extract the .zip 
file to access the required Kit file.

FIG. 110  

Send to NetLinx Device dialog window

FIG. 111  

Browse for Folder window

Verify you have downloaded the latest firmware file from 

www.amx.com

 and then 

save the Kit file to your computer.

Summary of Contents for MVP-9000i











































































































































































































Reviews:

No comments