manualshive.com logo in svg

AMX MVP-9000i, Operation And Reference Manual, Page: 111 / 202

Share
Download
AMX MVP-9000i Operation And Reference Manual Download Page 111

Upgrading Firmware

97

 MVP-9000i 9" Modero® ViewPoint® Touch Panel with Intercom

9.

In the 

Virtual NetLinx Master Settings

 dialog box, click 

OK

 to close the box.

10.

In the 

Communications Settings

 dialog box, click 

OK

 to close the box.

11.

In the 

Master Communications Settings

 dialog box, click 

OK

 to save your settings and return to the main NetLinx 

Studio application.

12.

Click the 

OnLine Tree

 tab in the Workspace window to view the devices on the Virtual System. 

The default System 

value is 1

.

13.

Right-click on the 

Empty Device Tree/System

 entry and select 

Refresh System

 to re-populate the list. 

14.

The OnLine Tree should now display the connection to the device. The 

Connection Status

 Icon on the device may 

take up to five seconds to register the connection.

Step 3: Confirm and Upgrade the firmware via the USB port

Use the CC-USB Type-A to Mini-B 5-wire programming cable to provide communication between the mini-USB 
Program port on the touch panel and the PC. This method of communication is used to transfer firmware Kit files and 
TPD4 touch panel files. 

1.

Verify that the direct USB connection (Type-A on the panel to mini-USB on the panel) is configured properly, using 
the steps outlined in the previous two sections.

2.

With the panel already configured for USB communication and the Virtual Master setup within NetLinx Studio, 
refresh the Online Tree pane.

3.

After the 

Communication Verification

 dialog window verifies active communication between the Virtual Master and 

the panel, click the 

OnLine Tree

 tab in the Workspace window (FIG. 109) to view the devices on the Virtual 

System. 

The default System value is 

1

. 

4.

Right-click on the System entry (FIG. 109) and select 

Refresh System

 to re-populate the list. Verify the panel 

appears in the 

OnLine Tree

 tab of the Workspace window. 

The panel will not appear as a device below the virtual system number, in the 

Online 

Tree

 tab, until both the system number used in step 14 for the Virtual NetLinx Master 

is entered into the Master Connection section of the 

System Settings

 page and the 

panel is restarted.

A mini-USB connection is only detected after it is installed onto an active panel.

FIG. 109  

NetLinx Workspace window (showing panel connection via a Virtual NetLinx Master)

Virtual Master firmware
version and device number

MVP panel firmware version 
and device number

Summary of Contents for MVP-9000i











































































































































































































Reviews:

No comments