AMX MVP-9000i, Operation And Reference Manual, Page: 93 / 202

Protected Setup Pages
79 MVP-9000i 9" Modero® ViewPoint® Touch Panel with Intercom
Refer to the EAP Authentication section on page 178 and the Using the Wireless Site Survey Tool section on page 30 for
further details on these security options.
EAP-TLS
From the Security Modes options, press the Enterprise button to open the Wireless Security: Enterprise Mode page.
Scroll through the Security Type options to select EAP-TLS (FIG. 87).
TLS (Transport Layer Security) was the original standard wireless LAN EAP authentication protocol. TLS requires
additional work during the deployment phase, but provides additional security since even a compromised password is not
enough to break into an EAP-TLS protected wireless network environment.
EAP-TLS security is designed for wireless environments where it is necessary to securely transmit data over a wireless
network by adding an additional level of security protocol via the use of a private key.
EAP-TTLS (Cont.)
Inner Authentication Type: When pressed, this field cycles through the choices of available Inner
Authentication mechanism supported by the Devicescape Secure Wireless
Client:
• EAP-MSCHAPv2
• EAP-GTC
• EAP-OTP
• EAP-MD5
• MSCHAPv2
• MSCHAP
• PAP
• CHAP
Key Mgmt: This button has 4 options:
WPA-EAP: The default and most common setting for EAP authentication
methods. Accepts WPA, WPA2 & TKIP, or AES.
8021X: Used to specify IEEE 802.1x port authentication only.
CCKM-WPA: Cisco key management option. Used with CCKM and WPA
(TKIP encryption only) authentication.
CCKM-WPA2: Cisco key management option. Used with CCKM and WPA2
(AES encryption only) authentication.
NOTE: The Key Mgmt selection must match the security settings on the AP
in order for the connection to be successful.
Cancel/Save: • Cancel - discard changes and return to the previous page.
• Save - store the new security information, apply changes, and return to the
previous page.
FIG. 87 Wireless Security: Enterprise Mode - EAP-TLS