manualshive.com logo in svg

AMX MVP-9000i, Operation And Reference Manual, Page: 31 / 202

Share
Download
AMX MVP-9000i Operation And Reference Manual Download Page 31

Accessories

17

 MVP-9000i 9" Modero® ViewPoint® Touch Panel with Intercom

A Note About Wall and Rack Installation

Some products are installed in areas of differing temperature and cooling methodologies. These include products 
installed in walls, racks, cabinets, etc. Those areas may have different temperatures and/or cooling approaches that must 
be taken into consideration to maintain the product within the specified operating temperature.

FIG. 13 shows an AMX device installed in a wall with a filled volume (such as with insulation or concrete), as well as 
with a closed volume (such as between studs in an otherwise finished wall). The diagram shows how heat generated by 
the device or other devices may have no way to escape, and may build up to levels that may affect device operation.

In FIG. 14, the diagram displays an AMX device in a typical rack mounting, with full air circulation around the front and 
back of the device. In this case, the main concern is with heat building up between components, possibly to levels that 
may affect device operation.

Installation Recommendations

FIG. 13  

Heat convection in filled or closed volume, limited or no convection

FIG. 14  

Heat convection in rack-mounted devices

Summary of Contents for MVP-9000i











































































































































































































Reviews:

No comments