AMX MVP-9000i, Operation And Reference Manual, Page: 58 / 202

Setup Pages
44 MVP-9000i 9" Modero® ViewPoint® Touch Panel with Intercom
Features on this page include:
To shut down the panel:
1.
Access the Setup page.
2.
Press the Shutdown button.
3.
Disconnect any power source plugs or USB connections, if necessary.
Navigation Buttons
The following Navigation buttons (FIG. 50) appear on the left side of the Setup page:
The six buttons include:

Display : this button opens the Display page (page 45)

Audio : this button opens the Audio page (page 46)

Battery : this button opens the Power Management page (page 47)

Time : this button opens the Date/Time page (page 52)

Panel Info : this button opens the Panel Information page (page 54)

Protected : this button opens the Protected Setup page (page 59)
Setup Page
Back icon: The icon in the upper-left corner of each Setup page allows the user to return to
the previously selected page.
WiFi/Wired icon: The icon to the left of the Connection Status Icon displays whether the current
connection to the Master is
Wireless (image of a radio antenna) or Wired (image of
three networked computers).
Connection Status icon: The icon in the upper-right corner of each Setup page provides a constant visual
indication of current connection status.
Note : a Lock appears on the icon if the panel is connected to a secured NetLinx
Master.
Navigation Buttons: The buttons along on the left half of the page provide access to secondary Setup
pages (see following sections).
Connection Status: Displays whether the panel is has external communication, as well as the
encryption status of the Master, the connection type (
Ethernet or USB ), and to
which System the panel is connected.
• The Connection Status field always displays the device number. If the device
has not been established on a network, the device number will read “0”.
• Until a connection is established, the message displayed is: “ Attempting
connection.”.
• When a connection is established, the message displayed is either: “ Connected
via Ethernet “or “ Connected via USB “.
• The word “ Encrypted ” appears when an encrypted connection is established
with a NetLinx Master.
Reboot button: Press this button to reboot the panel.
Shutdown button: Press this button to shut off the panel. If the panel is docked in a docking station or
otherwise connected to external power, this button will be greyed out.
FIG. 50 Navigation buttons on the Status page