Protected Setup Pages
67
MVP-9000i 9" Modero® ViewPoint® Touch Panel with Intercom
Features on the second page of this tab include:
FIG. 75
System Settings - WiFi Tab (page 2)
System Settings - WiFi Tab - Page 2
Back:
Saves all changes and returns to the previous page.
WiFi/Wired icon:
The icon to the left of the Connection Status Icon displays whether the current
connection to the Master is
Wireless
(image of a radio antenna) or
Wired
(image
of three networked computers).
Connection Status icon:
The icon in the upper-right corner of each Protected Setup page provides a
constant visual indication of current connection status.
Note
: a Lock appears on the icon if the panel is connected to a secured NetLinx
Master.
SSID:
Displays the currently used SSID of the target AP.
Mode:
Displays the currently selected security mode within the
Simple
or
Enterprise
security modes. This may be changed within the
Simple
or
Enterprise
Security
mode popup windows (for more information, please refer to the
Security Modes
on page 68).
Security Type:
Displays the currently selected Security Mode:
Simple
or
Enterprise
.
Band Selection:
The
Band Selection
setting is used for setting the Wireless frequency to be
detected by the panel. The three settings include:
•
802.11 a/b/g
- Configures the panel to detect 802.11 b/g channels (1-14
Country specific) and all non-DFS 802.11a band channels.
• 802.11 b/g - Configures the panel to detect only channels 1, 6, & 11 (plus 12-
14 country specific).
•
802.11 a
- Configures the panel to detect only non-DFS 802.11 A band
channels (country-specific).
NOTE:
The band selection setting also affects any use of the Site Survey
function. However, it may take approximately 60 seconds to purge all
non-compliant APs from the Site Survey list when first selected.
Active Roaming:
Active roaming can be
Disabled
or
Enabled
. When enabled, the panel will
monitor the RF signal level and make a decision to switch to a new AP based on
certain criteria to provide the best performance possible. When disabled, the
panel will not disconnect from a currently connected access point until signal is
lost.
AP MAC:
This field contains the Access Point MAC address in which the panel is
connected. It also is used to display supplicant status during authentication and
association as the panel first connects to the access point.
Channel:
The RF channel being used for connection to the AP (
read -only
).
Signal Level Value:
This indicator displays a description of the signal strength of the Access Point
signal.
Signal Level:
Provides a graphical representation of the Signal Level Value.
Prev.
Touch this button to return to the first page of the WiFi tab.
Summary of Contents for MVP-9000i
