AMX MVP-9000i, Operation And Reference Manual, Page: 55 / 202

Configuring Communication
41 MVP-9000i 9" Modero® ViewPoint® Touch Panel with Intercom
5.
Click on the G4 panel name link associated with the target panel. A secondary web browser window appears on the
screen (FIG. 46).
6.
Click Yes from the Security Alert popup window to agree to the installation of the G4 WebControl application on
your computer. This application contains the necessary Active X and VNC client applications necessary to properly
view and control the panel pages from your computer.
7.
Some situations might display a Connection Details dialog (FIG. 47) requesting a VNC Server IP Address. This is
the IP Address not of the Master but of the target touch panel. Depending on which method of communication is
being used, it can be found in either:

Wired Ethernet - System Settings > IP Settings section within the IP Address field.

Wireless - Wireless Settings > IP Settings section within the IP Address field.
If this field does not appear, continue to step 9.
8.
If a WebControl password was set up on the G4 WebControl page, a G4 Authentication Session password dialog box
appears on the screen within the secondary browser window.
9.
Enter the Web Control session password into the Session Password field (FIG. 47).
This password was previously entered into the Control Password field within the G4 Web Control Settings page on
the panel.
10.
Click OK to send the password to the panel and begin the session.

A confirmation message appears stating "Please wait, Initial screen loading.".

The secondary window is then populated with the same G4 page being displayed on the target G4 panel.

A small circle appears within the on-screen G4 panel page and corresponds to the location of the mouse
cursor.

A left-mouse click on the computer-displayed panel page equates to an actual touch on the target G4 panel
page.
FIG. 46 Web Control VNC installation and Password entry screens
The G4 Web Control application is sent by the panel to the computer that is used for
communication. Once the application is installed, this popup will no longer appear.
This popup will only appear if you are connecting to the target panel using a different
computer.
FIG. 47 Connection Details dialog
IP Address of touch panel
- obtained from WiFi tab of
the System Settings page
(MVP-9000i)