![background image](http://html.mh-extra.com/html/amx/dvx-21xxhd/dvx-21xxhd_webconsole-and-programming-manual_2937827049.webp)
WebConsole - System Options
49
NetLinx Integrated Controllers (Firmware v4)- WebConsole & Programming Guide
Once you have selected the diagnostics messages to enable, click
Update
to apply your changes, close the Edit Options
window, and return to the Diagnostics page.
Refer to the
Diagnostics Options Definitions
section on page 50 for definitions of each Diagnostic option.
3.
The device that you just enabled diagnostics for appears in the Diagnostics Options page (identified by its Number, Device and
Port assignments at the top of the Diagnostics Option list), with the currently enabled diagnostics indicated with a green
checkmark (FIG. 53).
All returned messages are displayed in the Incoming Messages window. By default, all messages are refreshed every 5
seconds, as indicated by the
Refresh Interval
field. Use the Refresh Interval drop-down to specify how often your messages
are updated (available values = 2 seconds, 5 seconds, or 10 seconds).
The default setting is 5 seconds.
4.
To add more devices to the Diagnostics Options page:
Repeat steps 1-3.
Alternatively, you can click one of the
Edit
buttons to open the Edit Options window, and specify a System
Number
,
Device
and
Port
for a known System Device. Select the Diagnostics messages that you want to enable for this device and click
Update
.
FIG. 52
Edit Options window
FIG. 53
Edit Options window
Click to delete this device from the Diagnostics page
(disables all diagnostics on this device)
Click to apply changes
Click to close the Edit Options window
(without disabling diagnostics)
Click to select from Presets
(saved sets of enabled Diagnostic messages)
Click to Store and Recall Presets
To set Diagnostic Options for a different System
Device, enter the device’s System, Device and Port
information in these fields (and press Update to
add the specified device/diagnostics options
to the Diagnostics page).
Click the checkboxes to enable/disable
specific diagnostic messages
Scroll down to see the entire list.
(All Notifications enables all messages)
Click to select a different Refresh Rate
(default = 5 seconds)
Each device is identified here by it’s System
Number, Device and Port assignments
Click to modify the diagnostics settings
for this device, or to remove this device
from the Diagnostics Options list