![background image](http://html.mh-extra.com/html/amx/dvx-21xxhd/dvx-21xxhd_webconsole-and-programming-manual_2937827100.webp)
Terminal (Program Port/Telnet) Commands
100
NetLinx Integrated Controllers (Firmware v4)- WebConsole & Programming Guide
Terminal Commands (Cont.)
Command
Description
SHOW SYSTEM <S>
Displays a list of all devices in all systems currently on-line. The systems lists are either directly
connected to this Master (i.e. 1 hop away), or are referenced in the
DEFINE_DEVICE
section of the
NetLinx program. Optionally, you may provide the desired system number as a parameter to display
only that system's information (e.g.
SHOW SYSTEM 2001
).
The systems listed are in numerical order.
Example:
>SHOW SYSTEM
Local devices for system #50 (This System)
------------------------------------------------------------
Device (ID)Model (ID)Mfg FWID Version
00000 (00256)Master (00001)AMX Corp. 00256 v2.10.75
(PID=0:OID=0) Serial='2010-12090',0,0,0,0,0,0
Physical Address=NeuronID 000239712501
(00256)vxWorks Image (00001) 00257 v2.00.77
(PID=0:OID=1) Serial=N/A
(00256)BootROM (00001) 00258 v2.00.76
(PID=0:OID=2) Serial=N/A
(00256)AXlink I/F uContr(00001) 00270 v1.02
(PID=0:OID=3) Serial=0000000000000000
00096 (00192)VOLUME 3 CONTROL BO(00001)AMX Corp. 00000 v2.10
(PID=0:OID=0) Serial=0000000000000000
Physical Address=Axlink
00128 (00188)COLOR LCD TOUCH PAN(00001)AMX Corp. 32778 v5.01d
(PID=0:OID=0) Serial=0000000000000000
Physical Address=Axlink
05001 (00257)NXI Download (00001)AMX Corp. 00260 v1.00.20
(PID=0:OID=0) Serial=0,0,0,0,0,0,0,0,0,0,0,0,
Physical Address=NeuronID 000189145801
(00257)NXI/NXI-1000 Boot(00001) 00261 v1.00.00
(PID=0:OID=1) Serial=0,0,0,0,0,0,0,0,0,0,0,0,
10002 (00003)PHAST PLK-IMS (00001)Phast Corp 0003 v3.12
(PID=0:OID=0) Serial=0000000000000000
Physical Address=NeuronID 0100417BD800
START LOG (ON|OFF)
Enables and disables the collection of startup log messages. Once enabled, the first x number of
logs will be retained at startup for subsequent review via the "show start log" command. Use
SET
LOG COUNT
(page 93) to set the number of log message that are retained.
TCP LIST
Displays a list of active TCP/IP connections.
Example:
>TCP LIST
The following TCP connections exist(ed):
1: IP=192.168.21.56:1042 Socket=0 (Dead)
2: IP=192.168.21.56:1420 Socket=0 (Dead)
TIME
Displays the current time on the Master.
Example:
>TIME
13:42:04
URL LIST <D:P:S>
Displays the list of URL addresses programmed in the Master (or another system if specified).
Example:
>URL LIST
The following URLs exist in the URL connection list
->Entry 0-192.168.13.65:1319 IP=192.168.13.65 State=Connected
Entry 1-192.168.13.200:1319 IP=192.168.13.200 State=Issue Connect
ZEROCONF
[ENABLE|DISABLE|STATUS]
Enable, disable or view the new Zeroconf client in the Master. When Zeroconf is enabled (default)
the Master's web interface will be registered via Zeroconf and can be viewed through a Zeroconf
browser plug-in such as Bonjour for IE.